Each instance of MSP Challenge is created by loading a configuration file into the MSP Challenge server. The server pulls all the requests data from the stipulated GeoServer, sets up the MySQL database for the requested edition and all its data. It also sets up the requested background simulations (e.g. Ecosystem simulation (MEL & EwE), Shipping simulation (SEL), Energy simulation (CEL)), and sets up any other more technical things required to get the MSP Challenge edition up and running. This means that without a configuration file, there is no MSP Challenge edition or session.

This configuration file is a text file in the JSON format. A separate software tool for editing these configuration files in a user friendly way was developed, you can see further down in this page how to use it.

See the North Sea, Baltic Sea, Clyde marine region pages for more information on what the default configuration files for these editions look like. If you've downloaded the entire MSP Challenge simulation platform, feel free to open up one of these configuration files in a text editor of your choice (all .json files in the "config" directory of the server software are such configuration files) to see how they look like.

How to edit configuration files

General considerations

When you download the client+server you will have also downloaded the configuration file editor. This is a tool we have created to make it easier to edit the configuration files.

If you want to edit an existing configuration file (at the moment: "NS_basic", "BS_Basic" or "CR_Basic"), we highly recommend you make a copy of this file, rename it to something that makes sense to you, and then only edit this new file! You can do this on your windows file explorer or in the config editor by loading the file you want to change and "saving as" before starting to edit.

When you open the configuration editor, a pop-up window will open (first image below). There you can select visual options to open the config editor. Once you click on the "Play!" button, you'll see two tabs on the left side (second image below): "Menu" and "Issues". If you click on the "Menu" tab (third image below) and then click on "Load" you can browse and select the file you want to use (the one you just saved). Click on "ok" after selecting your file. The config editor will take a few seconds to load the file you selected.

The "issues" tab (fourth image below) is useful when saving your file in case there are any incompatibility in the configuration files, they will be listed here.

First config editor screens.png



General navigation in the configuration editor

Once your selected file is open, you can see its structure on the left side (picture below on the right), the main functions in the configuration file are discribed below:

  • Restrictions:

Under this category you can define restrictions - combinations of uses that you want to set as impossible (error) or not advised (warning).

  • Plans

A configuration file with plans saved in it allows you to recreate a session with those plans again. Use this feature to set up a session with so-called starting plans in them.

  • CEL

CEL is the offshore energy simulation. In the config file you can customize the icons shown in the simulation where there are oil and gas fields and wind parks.

  • SEL

SEL is the shipping simulation. Here you can configure the ports and the shipping intensity from each port for different time frames.

  • MEL

This is an acronym for ‘MSP EwE Link’. MEL allows you to specify which data layers (e.g. fish farms) create which kind of pressures (e.g. artificial habitat) that are subsequently fed into the EwE ecosystem simulation running in the background of an MSP Challenge 2050 session.

  • Layers

This category contains all the data layers included and their visualization settings.

  • Objectives:

A configuration file with objectives saved in it allows you to recreate a session with those objectives again. Use this feature to set up a session with specific starting objectives in them.

  • Region:

At the moment it is not advisable to change the region from the config file as this defines the path to the specific folder the layers and models are stored for this session, all the settings for the session would not make sense anymore (think for instance of layer names that change for different regions).


You might have noticed that some categories on the left have a little arrow under the name, if you click on those it will expand the menu to the right side of the screen (at some point you might need to scroll to the right to see it all), lets see for instance under "restrictions":

Navigation combi.png

Tips to start customizing your session

Time span of you session

You might want to start by defining the start year and end year, as well as the duration of each era for your session:

Time.png

Do not forget to save your changes by clicking on the "Menu" tab and "save as".

Objectives

Check the objectives set in the basic file and see if you want to add, change (just type on the field you want to change), or remove any of them. To add an objective you may have to scroll down to the end of the list of objectives to click on the + button.

Do not forget to save your changes by clicking on the "Menu" tab and "save as".

Restrictions

You should also customize the restrictions to your needs. There are 3 types of restrictions: info, warning or error. Each has a different consequence in the game, all involve at least a message under the Issues tab of a plan. Errors hamper players to finalize a plan, warnings are strong messages but players can still finalize a plan, and info messages are purely insightful information messages. Adding, changing and removing restrictions follows the same logic from the objectives, if you want to add a restriction, scrool to the end of the restrictions list and click on the + button. Follow the steps to add a new restriction in the image gallery below.


Do not forget to save your changes by clicking on the "Menu" tab and "save as".

Data layers

You can also customize the data layers present in the platform, removing, adding and changing the way they are visualized in the platform itself.

In the so called basic configuration files we have not included all data layer present in GeoServer, meaning that you could choose to add data layers to your session, for instance, in the Baltic Sea basic configuration file there are data layers regarding ecology such as the areas where fishing cod is not allowed, that are not showed in the data layers menu (they are however taken into account in the ecosystem model via MEL), you could opt to make them available for your session.

  • Remove

Please note that there will be no confirmation pop-up, the layer will be immediately deleted and this action is not reversable. If you delete a layer by mistake, you will have to add it manually (or don't save your changes when leaving, but you might be loosing a lot of other customizations by doing so).

Removing a layer is simple: just click on the cross under the layer's name (just like highlighted in the objectives' section).

  • Add

You can add 2 types of data files in geoserver: raster and vector, by using the "+" button, at the end of the layers section.

Vector Layers

When adding a layer in the configuration file, please fill in the information as explained below.

Explanations TYPES.png


1.      Name of the layer as in GeoServer

2.      Type of layer, for vector layers: point, line, or polygon based

3.      Name of the layer as you want it to be shown in game

4.      Layer category you want the layer to be in the game *

5.      Layer sub-category you want the layer to be in the game *

6.      In this sub-section you can customize the interaction users can have with the layer (mark the green checkbox if the layer contributes to production of green energy (for instance wind parks), this will influence the KPIs.

7. In this sub-section you can set up information about the layer in question.

8.  If you add a layer with different types, for instance the layer Military Areas in the North Sea (see image below) has different types, you should set this up in your configuration file (in the database of your datalayer you should add a new column with the name "type" where you set your values from 0 to n for each desired category. After that you can customize the types in the config editor).

* you can see the existing categories and sub categories of data for each edition in the data sources page.

Military areas types.png

Do not forget to save your changes by clicking on the "Menu" tab and "save as".


Raster Layers

When adding a raster layer you'll have to make essentially the same as for a vector layer with some additional details:


  1. Geotype needs to be set to "raster"
  2. The raster size (Width and Height) is set by default, enter the measures of your raster image
  3. The "Raster Material" is the name of the shader you will be using to customize the layers' visualization; the "RasterMELCustomizable" shader is one we have created specially for the MSP Challenge. We advise you to use this shader, with it you can use any number of categories and customize the categories and colours to be used see section below under "raster"
  4. You can set this value to zero or slightly above if you want to cut zome values from your raster image
  5. For layers that are not originated from our simulations you should check this box

Do not forget to save your changes by clicking on the "Menu" tab and "save as".

  • Change/customize

All data layers have by default at least one type; colours, patterns and icons are attributed to each type by default. You can customize them scrolling down to the “layer types” and expanding the type menu.

Below we show the important fields to edit for both vector and raster layers.

Vector layers

Config raster numbers.png

  1. Each type in your data layer database has an id number starting by 0. If a layer doesn't have types, you will see only the type 0 and that is the one you can set-up
  2. If your data layer is polygon based you should tick "show polygons"
  3. You can choose the color of your geometry here by clicking on the colour box
  4. You can choose a pattern to fill your geometry, the default is 0, which will fill your polygon with solid colour
  5. If your layer is based on lines, you should tick that box (instead of the polygon one) and you have the aditional option to use different types of lines

The same logic applies when dealing with point based layers.


Do not forget to save your changes by clicking on the "Menu" tab and "save as".

Raster

For raster files the main difference is that you have to create the different types yourself. The first step is knowing what is the range of values of your raster file, next you have to determine what is meaningfull for the users: is it worth having intervals of 0,1 m/s or 1m/s in a wind speed layer? Intervals need to be equal in the same data layer, not in all layers. This will determine the number of types for a raster layer. See example of the wind speed layer for the North Sea edition:

Config types raster.png

Do not forget to save your changes by clicking on the "Menu" tab and "save as".

CEL

CEL is the acronym of our energy simulation, here you can see the visuals' definition for items that fall under the production of green energy or grey energy. You can opt for another colour and even icon (but the icons must be implement in the game, so for now you are stuck with those that are in the list).

SEL

Under SEL you will find all details used in the shipping simulation.

The ports layers list all layers that are used in the shipping simulation as ports, consider for instance that besides the known ports, a wind farm is a "port" for maintenance, meaning that there are maintenance vessels going to that wind park.

Under the "Ports Intensity" you will find the shipping intensity expected for that port for different types of vessels. Here you are also allowed to make projections into the future by using the starting time (month).

MEL

The first thing to be set up in MEL is the ecosystem model it connects to and the size of it's grid as well as coordinates of its extreme positions. If this is not correctly set-up the output from the ecosystem model will not show properly.

Under MEL you can also find which layers from the MSP Challenge contribute to each pressure layer created and in which proportion. This is also customizable as more evidence is available during the course of time. If for instance you have a session focused on the effects of shipping in the ecossystem due to the noise produced, you can customize this pressure to the different values according to vessel type to have a more meaningfull insight on these effects.

Also in this section you can add or remove layers connected to each pressure.

For the cases where a plan (for example a wind farm) has a construction phase, the pressures that take effect under the construction phase or exploitation phase may differ and you can add the layer twice, one of them ticking the box " When under construction" in one of them to specify the pressure intensity created during this phase.

The layer influence in each pressure is set from 0 (minimum) to 1 (maximum).

Under fishing you will find the fleets that users can influence in the simulation and the contribution of each country to the global fisheries from that fleet.

The outcomes from the ecosystem model to the MSP Challenge are also listed and categorized here. The way they are visualized in the game is actually done under the layers menu. Under our layer naming convention you can find the outcomes of MEL as "mel_[name of output]".

Do not forget to save your changes by clicking on the "Menu" tab and "save as".

Plans:

In this section you can find the starting plans defined in the configuration file. Starting plans are important for the shipping and energy models to run with the base scenarion (current situation) at the starting point in the sea basin . It's not advisable to remove any starting plans.

Although you could edit plans in the configuration editor, it's not very straightforward; they are best created or modified if needed in the client (in the simulation). Unfortunatly, at the momment, we have no user friendly way to save the plans made in the client.

Extra tips

If you find yourself not being able to edit a field, right click on it, you will be presented with 2 extra options: "info" and "instantiate". The "info" button will provide you insight over the field you are editing, if you click on the "instantiate" button you will enable editing the text.

If you are not sure about what a field name means or what values should be filled in in a field, you can right click with the mouse and click on "info" to have more information. Note that we are still implementing this feature so it's possible that when you right click on a field nothing shows up yet.

This page was last edited on 13 March 2020, at 10:12. Content is available under GPLv3 unless otherwise noted.